# Arc (geometry)

# Arc (geometry)

Every pair of distinct points on a circle determines two arcs. If the two points are not directly opposite each other, one of these arcs, the **minor arc**, will subtend an angle at the centre of the circle that is less than π radians (180 degrees), and the other arc, the **major arc**, will subtend an angle greater than π radians.

Circular arcs

Length of an arc of a circle

The length (more precisely, arc length) of an arc of a circle with radius *r* and subtending an angle *θ* (measured in radians) with the circle center — i.e., the **central angle** — is

This is because

Substituting in the circumference

and, with *α* being the same angle measured in degrees, since *θ* = *α*/180π, the arc length equals

A practical way to determine the length of an arc in a circle is to plot two lines from the arc's endpoints to the center of the circle, measure the angle where the two lines meet the center, then solve for L by cross-multiplying the statement:

- measure ofanglein degrees/360° =

*L*/circumference.

For example, if the measure of the angle is 60 degrees and the circumference is 24 inches, then

This is so because the circumference of a circle and the degrees of a circle, of which there are always 360, are directly proportional.

The upper half of a circle can be parameterized as

`Then the arc length fromtois`

Arc sector area

The area of the sector formed by an arc and the center of a circle (bounded by the arc and the two radii drawn to its endpoints) is

The area *A* has the same proportion to the circle area as the angle *θ* to a full circle:

We can cancel π on both sides:

By multiplying both sides by *r*2, we get the final result:

Using the conversion described above, we find that the area of the sector for a central angle measured in degrees is

Arc segment area

The area of the shape bounded by the arc and the straight line between its two end points is

`To get the area of thearc segment, we need to subtract the area of the triangle, determined by the circle's center and the two end points of the arc, from the area. SeeCircular segmentfor details.`

Arc radius

Using the intersecting chords theorem (also known as power of a point or secant tangent theorem) it is possible to calculate the radius *r* of a circle given the height *H* and the width *W* of an arc:

Consider the chord with the same endpoints as the arc. Its perpendicular bisector is another chord, which is a diameter of the circle. The length of the first chord is *W*, and it is divided by the bisector into two equal halves, each with length *W*/2. The total length of the diameter is 2*r*, and it is divided into two parts by the first chord. The length of one part is the sagitta of the arc, *H*, and the other part is the remainder of the diameter, with length 2*r* − *H*. Applying the intersecting chords theorem to these two chords produces

whence

so

Parabolic arcs

See also

Biarc

Circular-arc graph

Meridian arc

Circumference

Perimeter