# Minkowski space

# Minkowski space

In mathematical physics, **Minkowski space** (or **Minkowski spacetime**) is a combination of three-dimensional Euclidean space and time into a four-dimensional manifold where the spacetime interval between any two events is independent of the inertial frame of reference in which they are recorded. Although initially developed by mathematician Hermann Minkowski for Maxwell's equations of electromagnetism, the mathematical structure of Minkowski spacetime was shown to be an immediate consequence of the postulates of special relativity.^{[10]}

Minkowski space is closely associated with Einstein's theory of special relativity and is the most common mathematical structure on which special relativity is formulated. While the individual components in Euclidean space and time may differ due to length contraction and time dilation, in Minkowski spacetime, all frames of reference will agree on the total distance in spacetime between events.^{[1]} Because it treats time differently than it treats the 3 spatial dimensions, Minkowski space differs from four-dimensional Euclidean space.

In 3-dimensional Euclidean space (e.g., simply *space* in Galilean relativity), the isometry group (the maps preserving the regular Euclidean distance) is the Euclidean group. It is generated by rotations, reflections and translations. When time is amended as a fourth dimension, the further transformations of translations in time and Galilean boosts are added, and the group of all these transformations is called the Galilean group. All Galilean transformations preserve the *3-dimensional* Euclidean distance. This distance is purely spatial. Time differences are *separately* preserved as well. This changes in the spacetime of special relativity, where space and time are interwoven.

Spacetime is equipped with an indefinite non-degenerate bilinear form, variously called the *Minkowski metric*,^{[11]} the *Minkowski norm squared* or *Minkowski inner product* depending on the context.^{[2]} The Minkowski inner product is defined so as to yield the spacetime interval between two events when given their coordinate difference vector as argument.^{[12]} Equipped with this inner product, the mathematical model of spacetime is called Minkowski space. The analogue of the Galilean group for Minkowski space, preserving the spacetime interval (as opposed to the spatial Euclidean distance) is the Poincaré group.

In summary, Galilean spacetime and Minkowski spacetime are, when viewed as manifolds, actually *the same*. They differ in what further structures are defined *on* them. The former has the Euclidean distance function and time (separately) together with inertial frames whose coordinates are related by Galilean transformations, while the latter has the Minkowski metric together with inertial frames whose coordinates are related by Poincaré transformations.

History

Four-dimensional Euclidean spacetime

In 1905–06 Henri Poincaré showed^{[13]} that by taking time to be an imaginary fourth spacetime coordinate *ict*, where c is the speed of light and i is the imaginary unit, a Lorentz transformation can formally be regarded as a rotation of coordinates in a four-dimensional space with three real coordinates representing space, and one imaginary coordinate representing time, as the fourth dimension. In physical spacetime special relativity stipulates that the quantity

is invariant under coordinate changes from one inertial frame to another, i. e. under Lorentz transformations. Here the speed of light c is, following Poincaré, set to unity. In the space suggested by him (Poincaré mentions this only in passing) where physical spacetime is *coordinatized* by (*t*, *x*, *y*, *z*) ↦ (*x*, *y*, *z*, *it*), call it *coordinate space*, Lorentz transformations appear as ordinary rotations preserving the quadratic form

on coordinate space. The naming and ordering of coordinates, with the same labels for space coordinates, but with the imaginary time coordinate as the *fourth coordinate*, is conventional. The above expression, while making the former expression more familiar,^{[3]} may potentially be confusing because it is *not* the same t that appears in the latter (*time coordinate*) as in the former (*time itself* in some inertial system as measured by clocks stationary in that system).

Rotations in planes spanned by two space unit vectors appear in coordinate space as well as in physical spacetime appear as Euclidean rotations and are interpreted in the ordinary sense. The "rotation" in a plane spanned by a space unit vector and a time unit vector, while formally still a rotation in coordinate space, is a Lorentz boost in physical spacetime with *real* inertial coordinates (see also hyperbolic rotation). The analogy with Euclidean rotations is thus only partial.

This idea was elaborated by Hermann Minkowski,^{[14]} who used it to restate the Maxwell equations in four dimensions, showing directly their invariance under the Lorentz transformation. He further reformulated in four dimensions the then-recent theory of special relativity of Einstein. From this he concluded that time and space should be treated equally, and so arose his concept of events taking place in a unified four-dimensional spacetime continuum.

Minkowski space

In a further development in his 1908 "Space and Time" lecture,^{[15]} Minkowski gave an alternative formulation of this idea that used a real time coordinate instead of an imaginary one, representing the four variables (*x*, *y*, *z*, *t*) of space and time in coordinate form in a four dimensional real vector space. Points in this space correspond to events in spacetime. In this space, there is a defined light-cone associated with each point, and events not on the light-cone are classified by their relation to the apex as *spacelike* or *timelike*. It is principally this view of spacetime that is current nowadays, although the older view involving imaginary time has also influenced special relativity.

In the English translation of Minkowski's paper, the Minkowski metric as defined below is referred to as the *line element*. The Minkowski inner product of below appears unnamed when referring to orthogonality (which he calls *normality*) of certain vectors, and the Minkowski norm squared is referred to (somewhat cryptically, perhaps this is translation dependent) as "sum".

Minkowski's principal tool is the Minkowski diagram, and he uses it to define concepts and demonstrate properties of Lorentz transformations (e.g. proper time and length contraction) and to provide geometrical interpretation to the generalization of Newtonian mechanics to relativistic mechanics. For these special topics, see the referenced articles, as the presentation below will be principally confined to the mathematical structure (Minkowski metric and from it derived quantities and the Poincaré group as symmetry group of spacetime) *following* from the invariance of the spacetime interval on the spacetime manifold as consequences of the postulates of special relativity, not to specific application or *derivation* of the invariance of the spacetime interval. This structure provides the background setting of all present relativistic theories, barring general relativity for which flat Minkowski spacetime still provides a springboard as curved spacetime is locally Lorentzian.

Minkowski, aware of the fundamental restatement of the theory which he had made, said

The views of space and time which I wish to lay before you have sprung from the soil of experimental physics, and therein lies their strength. They are radical. Henceforth space by itself, and time by itself, are doomed to fade away into mere shadows, and only a kind of union of the two will preserve an independent reality.— Hermann Minkowski, 1908, 1909

^{[15]}

Though Minkowski took an important step for physics, Einstein saw its limitation:

At a time when Minkowski was giving the geometrical interpretation of special relativity by extending the Euclidean three-space to a quasi-Euclidean four-space that included time, Einstein was already aware that this is not valid, because it excludes the phenomenon of gravitation. He was still far from the study of curvilinear coordinates and Riemannian geometry, and the heavy mathematical apparatus entailed.

^{[16]}

For further historical information see references Galison (1979), Corry (1997) and Walter (1999).

Mathematical structure

It is assumed below that spacetime is endowed with a coordinate system corresponding to an inertial frame. This provides an *origin*, which is necessary in order to be able to refer to spacetime as being modeled as a vector space. This is not really *physically* motivated in that a canonical origin ("central" event in spacetime) should exist. One can get away with less structure, that of an affine space, but this would needlessly complicate the discussion and would not reflect how flat spacetime is normally treated mathematically in modern introductory literature.

For an overview, Minkowski space is a 4-dimensional real vector space equipped with a nondegenerate, symmetric bilinear form on the tangent space at each point in spacetime, here simply called the *Minkowski inner product*, with metric signature either (+ − − −) or (− + + +). The tangent space at each event is a vector space of the same dimension as spacetime, 4.

Tangent vectors

In practice, one need not be concerned with the tangent spaces. The vector space nature of Minkowski space allows for the canonical identification of vectors in tangent spaces at points (events) with vectors (points, events) in Minkowski space itself. See e.g. Lee (2003, Proposition 3.8.) These identifications are routinely done in mathematics. They can be expressed formally in Cartesian coordinates as^{[17]}

with basis vectors in the tangent spaces defined by

Here *p* and *q* are any two events and the last identification is referred to as parallel transport. The first identification is the canonical identification of vectors in the tangent space at any point with vectors in the space itself. The appearance of basis vectors in tangent spaces as first order differential operators is due to this identification. It is motivated by the observation that a geometrical tangent vector can be associated in a one-to-one manner with a directional derivative operator on the set of smooth functions. This is promoted to a *definition* of tangent vectors in manifolds *not* necessarily being embedded in ℝ*n*. This definition of tangent vectors is not the only possible one as ordinary n-tuples can be used as well.

A tangent vector at a point p may be defined, here specialized to Cartesian coordinates in Lorentz frames, as 4 × 1 column vectors v associated to *each* Lorentz frame related by Lorentz transformation Λ such that the vector v in a frame related to some frame by Λ transforms according to *v* → Λ*v*. This is the *same* way in which the coordinates *x**μ* transform. Explicitly,

This definition is equivalent to the definition given above under a canonical isomorphism.

For some purposes it is desirable to identify tangent vectors at a point *p* with *displacement vectors* at *p*, which is, of course, admissible by essentially the same canonical identification.^{[18]} The identifications of vectors referred to above in the mathematical setting can correspondingly be found in a more physical and explicitly geometrical setting in Misner, Thorne & Wheeler (1973). They offer various degree of sophistication (and rigor) depending on which part of the material one chooses to read.

Metric signature

The metric signature refers to which sign the Minkowski inner product yields when given space (*spacelike* to be specific, defined further down) and time basis vectors (*timelike*) as arguments. Further discussion about this theoretically inconsequential, but practically necessary choice for purposes of internal consistency and convenience is deferred to the hide box below.

In general, but with several exceptions, mathematicians and general relativists prefer spacelike vectors to yield a positive sign, (− + + +), while particle physicists tend to prefer timelike vectors to yield a positive sign, (+ − − −). Authors covering several areas of physics, e.g. Steven Weinberg and Landau and Lifshitz ((− + + +) and (+ − − −) respectively) stick to one choice regardless of topic. Arguments for the former convention include "continuity" from the Euclidean case corresponding to the non-relativistic limit *c* → ∞. Arguments for the latter include that minus signs, otherwise ubiquitous in particle physics, go away. Yet other authors, especially of introductory texts, e.g. Kleppner & Kolenkow (1978), do *not* choose a signature at all, but instead opt to coordinatize spacetime such that the time *coordinate* (but not time itself!) is imaginary. This removes the need of the *explicit* introduction of a metric tensor (which may seem as an extra burden in an introductory course), and one needs *not* be concerned with covariant vectors and contravariant vectors (or raising and lowering indices) to be described below. The inner product is instead effected by a straightforward extension of the dot product in ℝ3 to ℝ3 × ℂ. This works in the flat spacetime of special relativity, but not in the curved spacetime of general relativity, see Misner, Thorne & Wheeler (1973, Box 2.1, Farewell to *ict*) (who, by the way use (− + + +)). MTW also argues that it hides the true *indefinite* nature of the metric and the true nature of Lorentz boosts, which aren't rotations. It also needlessly complicates the use of tools of differential geometry that are otherwise immediately available and useful for geometrical description and calculation – even in the flat spacetime of special relativity, e.g. of the electromagnetic field.

Terminology

Mathematically associated to the bilinear form is a tensor of type (0,2) at each point in spacetime, called the *Minkowski metric*.^{[4]} The Minkowski metric, the bilinear form, and the Minkowski inner product are actually all the very same object; it is a bilinear function that accepts two (contravariant) vectors and returns a real number. In coordinates, this is the 4×4 matrix representing the bilinear form.

For comparison, in general relativity, a Lorentzian manifold *L* is likewise equipped with a metric tensor *g*, which is a nondegenerate symmetric bilinear form on the tangent space *T pL* at each point p of

*L*. In coordinates, it may be represented by a 4×4 matrix

*depending on spacetime position*. Minkowski space is thus a comparatively simple special case of a Lorentzian manifold. Its metric tensor is in coordinates the same symmetric matrix at every point of

*M*, and its arguments can, per above, be taken as vectors in spacetime itself.

Introducing more terminology (but not more structure), Minkowski space is thus a pseudo-Euclidean space with total dimension *n* = 4 and signature (3, 1) or (1, 3). Elements of Minkowski space are called events. Minkowski space is often denoted **R**3,1 or **R**1,3 to emphasize the chosen signature, or just *M*. It is perhaps the simplest example of a pseudo-Riemannian manifold.

An interesting example of non-inertial coordinates for (part of) Minkowski spacetime are the Born coordinates. Another useful set of coordinates are the lightcone coordinates.

Pseudo-Euclidean metrics

The Minkowski metric^{[5]} η is the metric tensor of Minkowski space. It is a pseudo-Euclidean metric, or more generally a *constant* pseudo-Riemannian metric in Cartesian coordinates. As such it is a nondegenerate symmetric bilinear form, a type (0,2) tensor. It accepts two arguments *u**p*, *v**p*, vectors in *T pM*,

*p*∈

*M*, the tangent space at

*p*in

*M*. Due to the above-mentioned canonical identification of

*T*with

**p**M*M*itself, it accepts arguments

*u*,

*v*with both

*u*and

*v*in

*M*.

As a notational convention, vectors v in M, called 4-vectors, are denoted in sans-serif italics, and not, as is common in the Euclidean setting, with boldface **v**. The latter is generally reserved for the 3-vector part (to be introduced below) of a 4-vector.

The definition

yields an inner product-like structure on *M*, previously and also henceforth, called the *Minkowski inner product*, similar to the Euclidean inner product, but it describes a different geometry. It is also called the *relativistic dot product*. If the two arguments are the same,

the resulting quantity will be called the *Minkowski norm squared*. The Minkowski inner product satisfies the following properties.

The first two conditions imply bilinearity. The defining *difference* between a pseudo-inner product and an inner product proper is that the former is *not* required to be positive definite, that is, *η*(*u*, *u*) < 0 is allowed.

The most important feature of the inner product and norm squared is that *these are quantities unaffected by Lorentz transformations*. In fact, it can be taken as the defining property of a Lorentz transformation that it preserves the inner product (i.e. the value of the corresponding bilinear form on two vectors). This approach is taken more generally for *all* classical groups definable this way in classical group. There, the matrix Φ is identical in the case O(3, 1) (the Lorentz group) to the matrix *η* to be displayed below.

Two vectors *v* and *w* are said to be orthogonal if *η*(*v*, *w*) = 0. For a geometric interpretation of orthogonality in the special case when *η*(*v*, *v*) ≤ 0 and *η*(*w*, *w*) ≥ 0 (or vice versa), see hyperbolic orthogonality.

A vector *e* is called a unit vector if *η*(*e*, *e*) = ±1. A basis for *M* consisting of mutually orthogonal unit vectors is called an orthonormal basis.

For a given inertial frame, an orthonormal basis in space, combined by the unit time vector, forms an orthonormal basis in Minkowski space. The number of positive and negative unit vectors in any such basis is a fixed pair of numbers, equal to the signature of the bilinear form associated with the inner product. This is Sylvester's law of inertia.

More terminology (but not more structure): The Minkowski metric is a pseudo-Riemannian metric, more specifically, a Lorentzian metric, even more specifically, *the* Lorentz metric, reserved for 4-dimensional flat spacetime with the remaining ambiguity only being the signature convention.

Minkowski metric

From the second postulate of special relativity, together with homogeneity of spacetime and isotropy of space, it follows that the spacetime interval between two arbitrary events called 1 and 2 is:

The interval is independent of the inertial frame chosen, as is shown here. The factor ±1 determines the choice of the metric signature as an arbitrary sign convention.^{[19]} The numerical values of η, viewed as a matrix representing the Minkowski inner product, follow from the theory of bilinear forms.

Just as the signature of the metric is differently defined in the literature, this quantity is not consistently named. The interval (as defined here) is sometimes referred to as the interval squared.^{[20]} Even the square root of the present interval occurs.^{[21]} When signature and interval are fixed, ambiguity still remains as which coordinate is the time coordinate. It may be the fourth, or it may be the zeroth. This is not an exhaustive list of notational inconsistencies. It is a fact of life that one has to check out the definitions first thing when one consults the relativity literature.

The invariance of the interval under coordinate transformations between inertial frames follows from the invariance of

(with either sign ± preserved), provided the transformations are linear. This quadratic form can be used to define a bilinear form

via the polarization identity. This bilinear form can in turn be written as

where [*η*] is a 4×4 matrix associated with η. Possibly confusingly, denote [*η*] with just η as is common practice. The matrix is read off from the explicit bilinear form as

and the bilinear form

with which this section started by assuming its existence, is now identified.

For definiteness and shorter presentation, the signature (− + + +) is adopted below. This choice (or the other possible choice) has no (known) physical implications. The symmetry group preserving the bilinear form with one choice of signature is isomorphic (under the map given here) with the symmetry group preserving the other choice of signature. This means that both choices are in accord with the two postulates of relativity. Switching between the two conventions is straightforward. If the metric tensor *η* has been used in a derivation, go back to the earliest point where it was used, substitute *η* for *–η*, and retrace forward to the desired formula with the desired metric signature.

Standard basis

A standard basis for Minkowski space is a set of four mutually orthogonal vectors { *e*0, *e*1, *e*2, *e*3 } such that

These conditions can be written compactly in the form

Relative to a standard basis, the components of a vector *v* are written (*v*0, *v*1, *v*2, *v*3) where the Einstein notation is used to write *v* = *v μe**μ*. The component

*v*0 is called the

**timelike component**of

*v*while the other three components are called the

**spatial components**. The spatial components of a 4-vector

*v*may be identified with a 3-vector

**v**= (

*v*1,

*v*2,

*v*3).

In terms of components, the Minkowski inner product between two vectors *v* and *w* is given by

and

Here **lowering of an index** with the metric was used.

Raising and lowering of indices

Technically, a non-degenerate bilinear form provides a map between a vector space and its dual, in this context, the map is between the tangent spaces of *M* and the cotangent spaces of *M*. At a point in *M*, the tangent and cotangent spaces are dual vector spaces (so the dimension of the cotangent space at an event is also 4). Just as an authentic inner product on a vector space with one argument fixed, by Riesz representation theorem, may be expressed as the action of a linear functional on the vector space, the same holds for the Minkowski inner product of Minkowski space.^{[23]}

Thus if *v**μ* are the components of a vector in a tangent space, then *η μνv**μ* =

*v**ν*are the components of a vector in the cotangent space (a linear functional). Due to the identification of vectors in tangent spaces with vectors in

*M*itself, this is mostly ignored, and vectors with lower indices are referred to as

**covariant vectors**. In this latter interpretation, the covariant vectors are (almost always implicitly) identified with vectors (linear functionals) in the dual of Minkowski space. The ones with upper indices are

**contravariant vectors**. In the same fashion, the inverse of the map from tangent to cotangent spaces, explicitly given by the inverse of

*η*in matrix representation, can be used to define

**raising of an index**. The components of this inverse are denoted

*η**μν*. It happens that

*η**μν*=

*η**μν*. These maps between a vector space and its dual can be denoted

*η*♭ (eta-flat) and

*η*♯ (eta-sharp) by the musical analogy.

^{[24]}

Contravariant and covariant vectors are geometrically very different objects. The first can and should be thought of as arrows. A linear functional can be characterized by two objects: its kernel, which is a hyperplane passing through the origin, and its norm. Geometrically thus, covariant vectors should be viewed as a set of hyperplanes, with spacing depending on the norm (bigger = smaller spacing), with one of them (the kernel) passing through the origin. The mathematical term for a covariant vector is 1-covector or 1-form (though the latter is usually reserved for covector *fields*).

Misner, Thorne & Wheeler (1973) uses a vivid analogy with wave fronts of a de Broglie wave (scaled by a factor of Planck's reduced constant) quantum mechanically associated to a momentum four-vector to illustrate how one could imagine a covariant version of a contravariant vector. The inner product of two contravariant vectors could equally well be thought of as the action of the covariant version of one of them on the contravariant version of the other. The inner product is then how many time the arrow pierces the planes. The mathematical reference, Lee (2003), offers the same geometrical view of these objects (but mentions no piercing).

The electromagnetic field tensor is a differential 2-form, which geometrical description can as well be found in MTW.

One may, of course, ignore geometrical views all together (as is the style in e.g. Weinberg (2002) and Landau & Lifshitz 2002) and proceed algebraically in a purely formal fashion. The time-proven robustness of the formalism itself, sometimes referred to as index gymnastics, ensures that moving vectors around and changing from contravariant to covariant vectors and vice versa (as well as higher order tensors) is mathematically sound. Incorrect expressions tend to reveal themselves quickly.

The formalism of the Minkowski metric

The present purpose is to show semi-rigorously how *formally* one may apply the Minkowski metric to two vectors and obtain a real number, i.e. to display the role of the differentials, and how they disappear in a calculation. The setting is that of smooth manifold theory, and concepts such as convector fields and exterior derivatives are introduced.

A full-blown version of the Minkowski metric in coordinates as a tensor field on spacetime has the appearance

Explanation: The coordinate differentials are 1-form fields. They are defined as the exterior derivative of the coordinate functions *x**μ*. These quantities evaluated at a point p provide a basis for the cotangent space at p. The tensor product (denoted by the symbol ⊗) yields a tensor field of type (0, 2), i.e. the type that expects two contravariant vectors as arguments. On the right hand side, the symmetric product (denoted by the symbol ⊙ or by juxtaposition) has been taken. The equality holds since, by definition, the Minkowski metric is symmetric.^{[25]} The notation on the far right is also sometimes used for the related, but different, line element. It is *not* a tensor. For elaboration on the differences and similarities, see Misner, Thorne & Wheeler (1973, Box 3.2 and section 13.2.)

*Tangent* vectors are, in this formalism, given in terms of a basis of differential operators of the first order,

where p is an event. This operator applied to a function f gives the directional derivative of f at p in the direction of increasing *x**μ* with *x**ν*, *ν* ≠ *μ* fixed. They provide a basis for the tangent space at p.

The exterior derivative *df* of a function f is a **covector field**, i.e. an assignment of a cotangent vector to each point p, by definition such that

for each vector field X. A vector field is an assignment of a tangent vector to each point p. In coordinates X can be expanded at each point p in the basis given by the ∂/∂*x**ν*|*p*. Applying this with *f* = *x**μ*, the coordinate function itself, and *X* = ∂/∂*x**ν*, called a *coordinate vector field*, one obtains

Since this relation holds at each point p, the *dx**μ*|*p* provide a basis for the cotangent space at each p and the bases *dx**μ*|*p* and ∂/∂*x**ν*|*p* are dual to each other,

at each p. Furthermore, one has

for general one-forms on a tangent space *α*, *β* and general tangent vectors *a*, *b*. (This can be taken as a definition, but may also be proved in a more general setting.)

Thus when the metric tensor is fed two vectors fields *a*, *b*, both expanded in terms of the basis coordinate vector fields, the result is

where *a**μ*, *b**ν* are the *component functions* of the vector fields. The above equation holds at each point p, and the relation may as well be interpreted as the Minkowski metric at p applied to two tangent vectors at p.

As mentioned, in a vector space, such as that modelling the spacetime of special relativity, tangent vectors can be canonically identified with vectors in the space itself, and vice versa. This means that the tangent spaces at each point are canonically identified with each other and with the vector space itself. This explains how the right hand side of the above equation can be employed directly, without regard to spacetime point the metric is to be evaluated and from where (which tangent space) the vectors come from.

This situation changes in general relativity. There one has

where now *η* → *g*(*p*), i.e. g is still a metric tensor but now depending on spacetime and is a solution of Einstein's field equations. Moreover, *a*, *b* *must* be tangent vectors at spacetime point p and can no longer be moved around freely.

Lorentz transformations and symmetry

The Poincaré group is the group of all transformations preserving the interval. The interval is quite easily seen to be preserved by the translation group in 4 dimensions. The other transformations are those that preserve the interval and leave the origin fixed. Given the bilinear form associated with the Minkowski metric, the appropriate group follows directly from the theory (in particular the definition) of classical groups. In the linked article, one should identify *η* (in its a matrix representation) with the matrix Φ.

The appropriate group is O(3,1), in this context called the Lorentz group. Its elements are called (homogeneous) Lorentz transformations. For other methods of derivation, with a more physical twist, see derivations of the Lorentz transformations.

Among the simplest Lorentz transformations is a Lorentz boost. For reference, a boost in the *x*-direction is given by

where

is the Lorentz factor, and

Other Lorentz transformations are pure rotations, and hence elements of the SO(3) subgroup of O(3,1). A general homogeneous Lorentz transformation is a product of a pure boost and a pure rotation. An *inhomogeneous* Lorentz transformation is a homogeneous transformation followed by a translation in space and time. Special transformations are those that invert the space coordinates (P) and time coordinate (T) respectively, or both (PT).

All four-vectors in Minkowski space transform, by definition, according to the same formula under Lorentz transformations. Minkowski diagrams illustrate Lorentz transformations.

Causal structure

Where *v* is velocity, and *x*, *y*, and *z* are Cartesian coordinates in 3-dimensional space, and *c* is the constant representing the universal speed limit, and t is time, the four-dimensional vector *v* = (*ct*, *x*, *y*, *z*) = (*ct*, **r**) is classified according to the sign of *c*2*t*2 − *r*2. A vector is **timelike** if *c*2*t*2 > *r*2, **spacelike** if *c*2*t*2 < *r*2, and **null** or **lightlike** if *c*2*t*2 = *r*2. This can be expressed in terms of the sign of *η*(*v*,*v*) as well, but depends on the signature. The classification of any vector will be the same in all frames of reference that are related by a Lorentz transformation (but not by a general Poincaré transformation because the origin may then be displaced) because of the invariance of the interval.

The set of all null vectors at an event^{[6]} of Minkowski space constitutes the light cone of that event. Given a timelike vector *v*, there is a worldline of constant velocity associated with it, represented by a straight line in a Minkowski diagram.

Once a direction of time is chosen,^{[7]} timelike and null vectors can be further decomposed into various classes. For timelike vectors one has

future-directed timelike vectors whose first component is positive, (tip of vector located in absolute future in figure) and

past-directed timelike vectors whose first component is negative (absolute past).

Null vectors fall into three classes:

the zero vector, whose components in any basis are (0, 0, 0, 0) (origin),

future-directed null vectors whose first component is positive (upper light cone), and

past-directed null vectors whose first component is negative (lower light cone).

Together with spacelike vectors there are 6 classes in all.

An orthonormal basis for Minkowski space necessarily consists of one timelike and three spacelike unit vectors. If one wishes to work with non-orthonormal bases it is possible to have other combinations of vectors. For example, one can easily construct a (non-orthonormal) basis consisting entirely of null vectors, called a **null basis**.

Vector fields are called timelike, spacelike or null if the associated vectors are timelike, spacelike or null at each point where the field is defined.

Chronological and causality relations

Let *x*, *y* ∈ *M*. We say that

*x***chronologically precedes***y*if*y*−*x*is future-directed timelike. This relation has the transitive property and so can be written*x*<*y*.*x***causally precedes***y*if*y*−*x*is future-directed null or future-directed timelike. It gives a partial ordering of space-time and so can be written*x*≤*y*.

`Suppose`

*x*∈*M*is timelike. Then the**simultaneous hyperplane**for x isSince thishyperplanevaries as*x*varies, there is arelativity of simultaneityin Minkowski space.Reversed triangle inequality

If *v* and *w* are both future-directed timelike four-vectors, then in the (+ − − −) sign convention, norms are non-negative and

Generalizations

A Lorentzian manifold is a generalization of Minkowski space in two ways. The total number of spacetime dimensions is not restricted to be 4 (2 or more) and a Lorentzian manifold need not be flat, i.e. it allows for curvature.

Generalized Minkowski space

Minkowski space refers to a mathematical formulation in four dimensions. However, the mathematics can easily be extended or simplified to create an analogous generalized Minkowski space in any number of dimensions. If *n* ≥ 2, *n*-dimensional Minkowski space is a vector space of real dimension *n* on which there is a constant Minkowski metric of signature (*n* − 1, 1) or (1, *n* − 1). These generalizations are used in theories where spacetime is assumed to have more or less than 4 dimensions. String theory and M-theory are two examples where *n* > 4. In string theory, there appears conformal field theories with 1 + 1 spacetime dimensions.

de Sitter space can be formulated as a submanifold of generalized Minkowski space as can the model spaces of hyperbolic geometry (see below).

Curvature

As a *flat spacetime*, the three spatial components of Minkowski spacetime always obey the Pythagorean Theorem. Minkowski space is a suitable basis for special relativity, a good description of physical systems over finite distances in systems without significant gravitation. However, in order to take gravity into account, physicists use the theory of general relativity, which is formulated in the mathematics of a non-Euclidean geometry. When this geometry is used as a model of physical space, it is known as curved space.

Even in curved space, Minkowski space is still a good description in an infinitesimal region surrounding any point (barring gravitational singularities).^{[8]} More abstractly, we say that in the presence of gravity spacetime is described by a curved 4-dimensional manifold for which the tangent space to any point is a 4-dimensional Minkowski space. Thus, the structure of Minkowski space is still essential in the description of general relativity.

Geometry

The meaning of the term *geometry* for the Minkowski space depends heavily on the context. Minkowski space is not endowed with a Euclidean geometry, and not with any of the generalized Riemannian geometries with intrinsic curvature, those exposed by the *model spaces* in hyperbolic geometry (negative curvature) and the geometry modeled by the sphere (positive curvature). The reason is the indefiniteness of the Minkowski metric. Minkowski space is, in particular, not a metric space and not a Riemannian manifold with a Riemannian metric. However, Minkowski space contains submanifolds endowed with a Riemannian metric yielding hyperbolic geometry.

Model spaces of hyperbolic geometry of low dimension, say 2 or 3, *cannot* be isometrically embedded in Euclidean space with one more dimension, i.e. ℝ3 or ℝ4 respectively, with the Euclidean metric *g*, disallowing easy visualization.^{[9]}^{[26]} By comparison, model spaces with positive curvature are just spheres in Euclidean space of one higher dimension.^{[27]} It turns out however that these hyperbolic spaces *can* be isometrically embedded in spaces of one more dimension when the embedding space is endowed with the Minkowski metric *η*.

Define **H**1(*n*)*R* ⊂ **M***n*+1 to be the upper sheet (*ct* > 0) of the hyperboloid

in generalized Minkowski space **M***n*+1 of spacetime dimension *n* + 1. This is one of the surfaces of transitivity of the generalized Lorentz group. The induced metric on this submanifold,

the pullback of the Minkowski metric *η* under inclusion, is a Riemannian metric. With this metric **H**1(*n*)*R* is a Riemannian manifold. It is one of the model spaces of Riemannian geometry, the hyperboloid model of hyperbolic space. It is a space of constant negative curvature −1/*R*2.^{[28]} The 1 in the upper index refers to an enumeration of the different model spaces of hyperbolic geometry, and the *n* for its dimension. A 2(2) corresponds to the Poincaré disk model, while 3(*n*) corresponds to the Poincaré half-space model of dimension *n*.

Preliminaries

In the definition above *ι*:**H**1(*n*)*R* → **M***n*+1 is the inclusion map and the superscript star denotes the pullback. The present purpose is to describe this and similar operations as a preparation for the actual demonstration that **H**1(*n*)*R* actually is a hyperbolic space.

Behavior of tensors under inclusion, pullback of covariant tensors under general maps and pushforward of vectors under general maps |
---|

Behavior of tensors under inclusion:For inclusion maps from a submanifoldSintoMand a covariant tensorαof orderkonMit holds that X_{1}, X_{1}, ..., X_{k}are vector fields onS. The subscript star denotes the pushforward (to be introduced later), and it is in this special case simply the identity map (as is the inclusion map). The latter equality holds because a tangent space to a submanifold at a point is in a canonical way a subspace of the tangent space of the manifold itself at the point in question. One may simply writes ∈ Sonly.Pullback of tensors under general maps:The pullback of a covariantk-tensorα(one taking only contravariant vectors as arguments) under a map F:M → Nis a linear mapX^{1}, X^{2}, ..., X^{k}are vectors inT_{p}M. (This is in accord with what was detailed about the pullback of the inclusion map. In the general case here, one cannot proceed as simply becauseF_{∗}X_{1}≠ X_{1}in general.)The pushforward of vectors under general maps:Heuristically, pulling back a tensor to p ∈ MfromF(p) ∈ Nfeeding it vectors residing atp ∈ Mis by definition the same as pushing forward the vectors fromp ∈ MtoF(p) ∈ Nfeeding them to the tensor residing atF(N***.*Further unwinding the definitions, the pushforwardFp) ∈_{∗}:TM_{p}→ TN_{F(p)}of a vector field under a mapF:M → Nbetween manifolds is defined byM = ℝ^{m}, N= ℝ^{n}the pushforward ofFreduces toDF:ℝ^{m}→ ℝ^{n}, the ordinary differential, which is given by the Jacobian matrix of partial derivatives of the component functions. The differential is the best linear approximation of a functionFfromℝ^{m}toℝ^{n}. The pushforward is the smooth manifold version of this. It acts between tangent spaces, and is in coordinates represented by the Jacobian matrix of the coordinate representation of the function.
The corresponding pullback is the dual map from the dual of the range tangent space to the dual of the domain tangent space, i.e. it is a linear map, |

Hyperbolic stereographic projection

In order to exhibit the metric it is necessary to pull it back via a suitable *parametrization*. A parametrization of a submanifold *S* of *M* is a map *U* ⊂ ℝ*m* → *M* whose range is an open subset of *S*. If S has the same dimension as *M*, a parametrization is just the inverse of a coordinate map *φ*:*M* → *U* ⊂ ℝ*m*. The parametrization to be used is the inverse of *hyperbolic stereographic projection*. This is illustrated in the figure to the left for *n* = 2. It is instructive to compare to stereographic projection for spheres.

Stereographic projection *σ*:**H***n**R* → ℝ*n* and its inverse *σ*−1:ℝ*n* → **H***n**R* are given by

where, for simplicity, *τ* ≡ *ct*. The (*τ*, **x**) are coordinates on **M***n*+1 and the **u** are coordinates on ℝn.

Detailed derivation |
---|

Let |

Pulling back the metric

One has

and the map

The pulled back metric can be obtained by straightforward methods of calculus;

One computes according to the standard rules for computing differentials (though one is really computing the rigorously defined exterior derivatives),

and substitutes the results into the right hand side. This yields

Detailed outline of computation |
---|

One has |

This last equation shows that the metric on the ball is identical to the Riemannian metric *h*2(*n*)*R* in the Poincaré ball model, another standard model of hyperbolic geometry.

Alternative calculation using the pushforward |
---|

The pullback can be computed in a different fashion. By definition,σ^{–1} |

See also

Introduction to the mathematics of general relativity

Minkowski plane

Remarks

## References

*x*2 +

*y*2 +

*z*2 +

*t*2 =

*R*2 > 0 is a 3-sphere in ℝ4 and linear transformations preserving

*R*2 are either rotations or reflections.

*η*(

*v*,

*v*) need not be positive for nonzero v. The positive-definite condition has been replaced by the weaker condition of non-degeneracy. The bilinear form is said to be

*indefinite*.

*is*an isometric embedding into ℝ

*n*according to the Nash embedding theorem (Nash, J. (1956). "The Imbedding Problem for Riemannian Manifolds".

*Annals of Mathematics*.

**63**(1): 20–63. doi:10.2307/1969989. JSTOR 1969989. MR 0075639.), but the embedding dimension is much higher,

*n*= (

*m*/2)(

*m*+ 1)(3

*m*+ 11) for a Riemannian manifold of dimension m.

*The Classical Theory of Fields*. Course of Theoretical Physics.

**2**(4th ed.). Butterworth–Heinemann. ISBN 0-7506-2768-9., p. 5

*Riemannian Manifolds – An Introduction to Curvature*. Springer Graduate Texts in Mathematics.

**176**. New York · Berlin · Heidelberg: Springer Verlag. ISBN 978-0-387-98322-6., p. 31

*Independent Axioms for Minkowski Space-Time*(illustrated ed.). CRC Press. pp. 184–185. ISBN 978-0-582-31760-4. Extract of page 184

*Rendiconti del Circolo Matematico di Palermo*(PDF),

**21**: 129–176, doi:10.1007/BF03013466, hdl:2027/uiug.30112063899089 https://zenodo.org/record/1428444/files/article.pdf |url= missing title (help), pp. 129–176 Wikisource translation: On the Dynamics of the Electron

*Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse*: 53–111, pp. 53–111 *Wikisource translation: The Fundamental Equations for Electromagnetic Processes in Moving Bodies.

*Physikalische Zeitschrift*,

**10**: 75–88, pp. 75–88 Various English translations on Wikisource: "Space and Time."

*General Relativity: Papers in Honour of J. L. Synge*, L. O'Raifeartaigh editor, Clarendon Press, see page 11

*Introduction to Smooth manifolds*. Springer Graduate Texts in Mathematics.

**218**. ISBN 978-0-387-95448-6., See Lee's discussion on geometric tangent vectors early in chapter 3.

*Flat and Curved Space-times*(illustrated ed.). Oxford University Press. p. 209. ISBN 978-0-19-850656-0. Extract of page 209

*Relativistic Mechanics - Special Relativity and Classical Particle Dynamics*. New York: W. A. Benjamin. ISBN 978-0805384918., p. 71