Everipedia Logo
Everipedia is now IQ.wiki - Join the IQ Brainlist and our Discord for early access to editing on the new platform and to participate in the beta testing.
ASA X3.4

ASA X3.4

ASCII chart from an earlier-than 1972 printer manual (b1 is the least significant bit.)

ASCII chart from an earlier-than 1972 printer manual (b1 is the least significant bit.)

ASCII (/ˈæskiː/ (listen) ASS-kee),[15] [] abbreviated from American Standard Code for Information Interchange, is a character encoding standard for electronic communication. ASCII codes represent text in computers, telecommunications equipment, and other devices. Most modern character-encoding schemes are based on ASCII, although they support many additional characters.

ASCII is the traditional name for the encoding system; the Internet Assigned Numbers Authority (IANA) prefers the updated name US-ASCII, which clarifies that this system was developed in the US and based on the typographical symbols predominantly in use there.[16]

ASCII is one of the IEEE milestones.

ASCII
MIME / IANAus-ascii
Alias(es)ISO-IR-006[14]
Language(s)English
ClassificationISO 646 series
Extensions
  • Unicode
  • ISO/IEC 8859 (series)
  • KOI-8
  • OEM (series)
  • Windows-125x (series)
  • Others
Preceded byITA 2, FIELDATA
Succeeded byISO 8859, Unicode
Other related encoding(s)PETSCII

Overview

ASCII was developed from telegraph code. Its first commercial use was as a seven-bit teleprinter code promoted by Bell data services. Work on the ASCII standard began on October 6, 1960, with the first meeting of the American Standards Association's (ASA) (now the American National Standards Institute or ANSI) X3.2 subcommittee. The first edition of the standard was published in 1963,[17][18] underwent a major revision during 1967,[19][20] and experienced its most recent update during 1986.[21] Compared to earlier telegraph codes, the proposed Bell code and ASCII were both ordered for more convenient sorting (i.e., alphabetization) of lists, and added features for devices other than teleprinters.

Originally based on the English alphabet, ASCII encodes 128 specified characters into seven-bit integers as shown by the ASCII chart above.[22] Ninety-five of the encoded characters are printable: these include the digits 0 to 9, lowercase letters a to z, uppercase letters A to Z, and punctuation symbols. In addition, the original ASCII specification included 33 non-printing control codes which originated with Teletype machines; most of these are now obsolete,[23] although a few are still commonly used, such as the carriage return, line feed and tab codes.

For example, lowercase i would be represented in the ASCII encoding by binary 1101001 = hexadecimal 69 (i is the ninth letter) = decimal 105.

History

ASCII (1963). Control pictures of equivalent controls are shown where they exist, or a grey dot otherwise.

ASCII (1963). Control pictures of equivalent controls are shown where they exist, or a grey dot otherwise.

The American Standard Code for Information Interchange (ASCII) was developed under the auspices of a committee of the American Standards Association (ASA), called the X3 committee, by its X3.2 (later X3L2) subcommittee, and later by that subcommittee's X3.2.4 working group (now INCITS). The ASA became the United States of America Standards Institute (USASI)[15] [] and ultimately the American National Standards Institute (ANSI).

With the other special characters and control codes filled in, ASCII was published as ASA X3.4-1963,[18][24] leaving 28 code positions without any assigned meaning, reserved for future standardization, and one unassigned control code.[15] [] There was some debate at the time whether there should be more control characters rather than the lowercase alphabet.[15] [] The indecision did not last long: during May 1963 the CCITT Working Party on the New Telegraph Alphabet proposed to assign lowercase characters to sticks[1][25] 6 and 7,[26] and International Organization for Standardization TC 97 SC 2 voted during October to incorporate the change into its draft standard.[27] The X3.2.4 task group voted its approval for the change to ASCII at its May 1963 meeting.[28] Locating the lowercase letters in sticks[1][25] 6 and 7 caused the characters to differ in bit pattern from the upper case by a single bit, which simplified case-insensitive character matching and the construction of keyboards and printers.

The X3 committee made other changes, including other new characters (the brace and vertical bar characters),[29] renaming some control characters (SOM became start of header (SOH)) and moving or removing others (RU was removed).[15] [] ASCII was subsequently updated as USAS X3.4-1967,[19][30] then USAS X3.4-1968, ANSI X3.4-1977, and finally, ANSI X3.4-1986.[21][31]

Revisions of the ASCII standard:

  • ASA X3.4-1963[15][18][30][31]

  • ASA X3.4-1965 (approved, but not published, nevertheless used by IBM 2260 & 2265 Display Stations and IBM 2848 Display Control)[15] [] [32][30][31]

  • USAS X3.4-1967[15][19][31]

  • USAS X3.4-1968[15][31]

  • ANSI X3.4-1977[31]

  • ANSI X3.4-1986[21][31]

  • ANSI X3.4-1986 (R1992)

  • ANSI X3.4-1986 (R1997)

  • ANSI INCITS 4-1986 (R2002)[33]

  • ANSI INCITS 4-1986 (R2007)[34]

  • ANSI INCITS 4-1986 (R2012)

In the X3.15 standard, the X3 committee also addressed how ASCII should be transmitted (least significant bit first),[15] [] [35] and how it should be recorded on perforated tape. They proposed a 9-track standard for magnetic tape, and attempted to deal with some punched card formats.

Design considerations

Bit width

The X3.2 subcommittee designed ASCII based on the earlier teleprinter encoding systems. Like other character encodings, ASCII specifies a correspondence between digital bit patterns and character symbols (i.e. graphemes and control characters). This allows digital devices to communicate with each other and to process, store, and communicate character-oriented information such as written language. Before ASCII was developed, the encodings in use included 26 alphabetic characters, 10 numerical digits, and from 11 to 25 special graphic symbols. To include all these, and control characters compatible with the Comité Consultatif International Téléphonique et Télégraphique (CCITT) International Telegraph Alphabet No. 2 (ITA2) standard of 1924,[36][37] FIELDATA (1956), and early EBCDIC (1963), more than 64 codes were required for ASCII.

ITA2 were in turn based on the 5-bit telegraph code Émile Baudot invented in 1870 and patented in 1874.[37]

The committee debated the possibility of a shift function (like in ITA2), which would allow more than 64 codes to be represented by a six-bit code. In a shifted code, some character codes determine choices between options for the following character codes. It allows compact encoding, but is less reliable for data transmission, as an error in transmitting the shift code typically makes a long part of the transmission unreadable. The standards committee decided against shifting, and so ASCII required at least a seven-bit code.[15] []

The committee considered an eight-bit code, since eight bits (octets) would allow two four-bit patterns to efficiently encode two digits with binary-coded decimal. However, it would require all data transmission to send eight bits when seven could suffice. The committee voted to use a seven-bit code to minimize costs associated with data transmission. Since perforated tape at the time could record eight bits in one position, it also allowed for a parity bit for error checking if desired.[15] [] Eight-bit machines (with octets as the native data type) that did not use parity checking typically set the eighth bit to 0.[38] In some printers, the high bit was used to enable Italics printing.

Internal organization

The code itself was patterned so that most control codes were together and all graphic codes were together, for ease of identification. The first two so-called ASCII sticks[1][25] (32 positions) were reserved for control characters.[15] [] The "space" character had to come before graphics to make sorting easier, so it became position 20hex;[15] [] for the same reason, many special signs commonly used as separators were placed before digits. The committee decided it was important to support uppercase 64-character alphabets, and chose to pattern ASCII so it could be reduced easily to a usable 64-character set of graphic codes,[15] [] as was done in the DEC SIXBIT code (1963). Lowercase letters were therefore not interleaved with uppercase. To keep options available for lowercase letters and other graphics, the special and numeric codes were arranged before the letters, and the letter A was placed in position 41hex to match the draft of the corresponding British standard.[15] [] The digits 0–9 are prefixed with 011, but the remaining 4 bits correspond to their respective values in binary, making conversion with binary-coded decimal straightforward.

Many of the non-alphanumeric characters were positioned to correspond to their shifted position on typewriters; an important subtlety is that these were based on mechanical typewriters, not electric typewriters.[39] Mechanical typewriters followed the standard set by the Remington No. 2 (1878), the first typewriter with a shift key, and the shifted values of 23456789- were "#$%_&'() – early typewriters omitted 0 and 1, using O (capital letter o) and l (lowercase letter L) instead, but 1! and 0) pairs became standard once 0 and 1 became common. Thus, in ASCII !"#$% were placed in the second stick,[1][25] positions 1–5, corresponding to the digits 1–5 in the adjacent stick.[1][25] The parentheses could not correspond to 9 and 0, however, because the place corresponding to 0 was taken by the space character. This was accommodated by removing _ (underscore) from 6 and shifting the remaining characters, which corresponded to many European typewriters that placed the parentheses with 8 and 9. This discrepancy from typewriters led to bit-paired keyboards, notably the Teletype Model 33, which used the left-shifted layout corresponding to ASCII, not to traditional mechanical typewriters. Electric typewriters, notably the IBM Selectric (1961), used a somewhat different layout that has become standard on computers – following the IBM PC (1981), especially Model M (1984) – and thus shift values for symbols on modern keyboards do not correspond as closely to the ASCII table as earlier keyboards did. The /? pair also dates to the No. 2, and the ,< .> pairs were used on some keyboards (others, including the No. 2, did not shift , (comma) or . (full stop) so they could be used in uppercase without unshifting). However, ASCII split the ;: pair (dating to No. 2), and rearranged mathematical symbols (varied conventions, commonly -* =+) to :* ;+ -=.

Some common characters were not included, notably ½¼¢, while ^`~ were included as diacritics for international use, and <> for mathematical use, together with the simple line characters | (in addition to common /). The @ symbol was not used in continental Europe and the committee expected it would be replaced by an accented À in the French variation, so the @ was placed in position 40hex, right before the letter A.[15] []

The control codes felt essential for data transmission were the start of message (SOM), end of address (EOA), end of message (EOM), end of transmission (EOT), "who are you?" (WRU), "are you?" (RU), a reserved device control (DC0), synchronous idle (SYNC), and acknowledge (ACK). These were positioned to maximize the Hamming distance between their bit patterns.[15] []

Character order

ASCII-code order is also called ASCIIbetical order.[40] Collation of data is sometimes done in this order rather than "standard" alphabetical order (collating sequence). The main deviations in ASCII order are:

  • All uppercase come before lowercase letters; for example, "Z" precedes "a"

  • Digits and many punctuation marks come before letters

An intermediate order converts uppercase letters to lowercase before comparing ASCII values.

Character groups

Control characters

ASCII reserves the first 32 codes (numbers 0–31 decimal) for control characters: codes originally intended not to represent printable information, but rather to control devices (such as printers) that make use of ASCII, or to provide meta-information about data streams such as those stored on magnetic tape.

For example, character 10 represents the "line feed" function (which causes a printer to advance its paper), and character 8 represents "backspace". RFC 2822 [81] refers to control characters that do not include carriage return, line feed or white space as non-whitespace control characters.[41] Except for the control characters that prescribe elementary line-oriented formatting, ASCII does not define any mechanism for describing the structure or appearance of text within a document. Other schemes, such as markup languages, address page and document layout and formatting.

The original ASCII standard used only short descriptive phrases for each control character. The ambiguity this caused was sometimes intentional, for example where a character would be used slightly differently on a terminal link than on a data stream, and sometimes accidental, for example with the meaning of "delete".

Probably the most influential single device on the interpretation of these characters was the Teletype Model 33 ASR, which was a printing terminal with an available paper tape reader/punch option. Paper tape was a very popular medium for long-term program storage until the 1980s, less costly and in some ways less fragile than magnetic tape. In particular, the Teletype Model 33 machine assignments for codes 17 (Control-Q, DC1, also known as XON), 19 (Control-S, DC3, also known as XOFF), and 127 (Delete) became de facto standards. The Model 33 was also notable for taking the description of Control-G (code 7, BEL, meaning audibly alert the operator) literally, as the unit contained an actual bell which it rang when it received a BEL character. Because the keytop for the O key also showed a left-arrow symbol (from ASCII-1963, which had this character instead of underscore), a noncompliant use of code 15 (Control-O, Shift In) interpreted as "delete previous character" was also adopted by many early timesharing systems but eventually became neglected.

When a Teletype 33 ASR equipped with the automatic paper tape reader received a Control-S (XOFF, an abbreviation for transmit off), it caused the tape reader to stop; receiving Control-Q (XON, "transmit on") caused the tape reader to resume. This technique became adopted by several early computer operating systems as a "handshaking" signal warning a sender to stop transmission because of impending overflow; it persists to this day in many systems as a manual output control technique. On some systems Control-S retains its meaning but Control-Q is replaced by a second Control-S to resume output. The 33 ASR also could be configured to employ Control-R (DC2) and Control-T (DC4) to start and stop the tape punch; on some units equipped with this function, the corresponding control character lettering on the keycap above the letter was TAPE and TAPE respectively.[42]

The Teletype could not move the head backwards, so it did not put a key on the keyboard to send a BS (backspace). Instead there was a key marked RUB OUT that sent code 127 (DEL). The purpose of this key was to erase mistakes in a hand-typed paper tape: the operator had to push a button on the tape punch to back it up, then type the rubout, which punched all holes and replaced the mistake with a character that was intended to be ignored.[43] Teletypes were commonly used for the less-expensive computers from Digital Equipment Corporation, so these systems had to use the available key and thus the DEL code to erase the previous character.[44][45] Because of this, DEC video terminals (by default) sent the DEL code for the key marked "Backspace" while the key marked "Delete" sent an escape sequence, while many other terminals sent BS for the Backspace key. The Unix terminal driver could only use one code to erase the previous character, this could be set to BS or DEL, but not both, resulting in a long period of annoyance where users had to correct it depending on what terminal they were using (shells that allow line editing, such as ksh, bash, and zsh, understand both). The assumption that no key sent a BS caused Control+H to be used for other purposes, such as the "help" prefix command in GNU Emacs.[46]

Many more of the control codes have been given meanings quite different from their original ones. The "escape" character (ESC, code 27), for example, was intended originally to allow sending other control characters as literals instead of invoking their meaning. This is the same meaning of "escape" encountered in URL encodings, C language strings, and other systems where certain characters have a reserved meaning. Over time this meaning has been co-opted and has eventually been changed. In modern use, an ESC sent to the terminal usually indicates the start of a command sequence usually in the form of a so-called "ANSI escape code" (or, more properly, a "Control Sequence Introducer") from ECMA-48 (1972) and its successors, beginning with ESC followed by a "[" (left-bracket) character. An ESC sent from the terminal is most often used as an out-of-band character used to terminate an operation, as in the TECO and vi text editors. In graphical user interface (GUI) and windowing systems, ESC generally causes an application to abort its current operation or to exit (terminate) altogether.

The inherent ambiguity of many control characters, combined with their historical usage, created problems when transferring "plain text" files between systems. The best example of this is the newline problem on various operating systems. Teletype machines required that a line of text be terminated with both "Carriage Return" (which moves the printhead to the beginning of the line) and "Line Feed" (which advances the paper one line without moving the printhead). The name "Carriage Return" comes from the fact that on a manual typewriter the carriage holding the paper moved while the position where the typebars struck the ribbon remained stationary. The entire carriage had to be pushed (returned) to the right in order to position the left margin of the paper for the next line.

DEC operating systems (OS/8, RT-11, RSX-11, RSTS, TOPS-10, etc.) used both characters to mark the end of a line so that the console device (originally Teletype machines) would work. By the time so-called "glass TTYs" (later called CRTs or terminals) came along, the convention was so well established that backward compatibility necessitated continuing the convention. When Gary Kildall created CP/M he was inspired by some command line interface conventions used in DEC's RT-11. Until the introduction of PC DOS in 1981, IBM had no hand in this because their 1970s operating systems used EBCDIC instead of ASCII and they were oriented toward punch-card input and line printer output on which the concept of carriage return was meaningless. IBM's PC DOS (also marketed as MS-DOS by Microsoft) inherited the convention by virtue of being loosely based on CP/M,[47] and Windows inherited it from MS-DOS.

Unfortunately, requiring two characters to mark the end of a line introduces unnecessary complexity and questions as to how to interpret each character when encountered alone. To simplify matters plain text data streams, including files, on Multics[48] used line feed (LF) alone as a line terminator. Unix and Unix-like systems, and Amiga systems, adopted this convention from Multics. The original Macintosh OS, Apple DOS, and ProDOS, on the other hand, used carriage return (CR) alone as a line terminator; however, since Apple replaced these operating systems with the Unix-based macOS operating system, they now use line feed (LF) as well. The Radio Shack TRS-80 also used a lone CR to terminate lines.

Computers attached to the ARPANET included machines running operating systems such as TOPS-10 and TENEX using CR-LF line endings, machines running operating systems such as Multics using LF line endings, and machines running operating systems such as OS/360 that represented lines as a character count followed by the characters of the line and that used EBCDIC rather than ASCII. The Telnet protocol defined an ASCII "Network Virtual Terminal" (NVT), so that connections between hosts with different line-ending conventions and character sets could be supported by transmitting a standard text format over the network. Telnet used ASCII along with CR-LF line endings, and software using other conventions would translate between the local conventions and the NVT.[49] The File Transfer Protocol adopted the Telnet protocol, including use of the Network Virtual Terminal, for use when transmitting commands and transferring data in the default ASCII mode.[50][51] This adds complexity to implementations of those protocols, and to other network protocols, such as those used for E-mail and the World Wide Web, on systems not using the NVT's CR-LF line-ending convention.[52][53]

The PDP-6 monitor,[44] and its PDP-10 successor TOPS-10,[45] used Control-Z (SUB) as an end-of-file indication for input from a terminal. Some operating systems such as CP/M tracked file length only in units of disk blocks and used Control-Z to mark the end of the actual text in the file.[54] For these reasons, EOF, or end-of-file, was used colloquially and conventionally as a three-letter acronym for Control-Z instead of SUBstitute. The end-of-text code (ETX), also known as Control-C, was inappropriate for a variety of reasons, while using Z as the control code to end a file is analogous to it ending the alphabet and serves as a very convenient mnemonic aid. A historically common and still prevalent convention uses the ETX code convention to interrupt and halt a program via an input data stream, usually from a keyboard.

In C library and Unix conventions, the null character is used to terminate text strings; such null-terminated strings can be known in abbreviation as ASCIZ or ASCIIZ, where here Z stands for "zero".

BinaryOctDecHexAbbreviation[2][3][4]Name (1967)
196319651967
000 0000000000NULLNUL^@\0Null
000 0001001101SOMSOH^AStart of Heading
000 0010002202EOASTX^BStart of Text
000 0011003303EOMETX^CEnd of Text
000 0100004404EOT^DEnd of Transmission
000 0101005505WRUENQ^EEnquiry
000 0110006606RUACK^FAcknowledgement
000 0111007707BELLBEL^G\aBell
000 1000010808FE0BS^H\bBackspace[5][6]
000 1001011909HT/SKHT^I\tHorizontal Tab[7]
000 1010012100ALF^J\nLine Feed
000 1011013110BVTABVT^K\vVertical Tab
000 1100014120CFF^L\fForm Feed
000 1101015130DCR^M\rCarriage Return[8]
000 1110016140ESO^NShift Out
000 1111017150FSI^OShift In
001 00000201610DC0DLE^PData Link Escape
001 00010211711DC1^QDevice Control 1 (often XON)
001 00100221812DC2^RDevice Control 2
001 00110231913DC3^SDevice Control 3 (often XOFF)
001 01000242014DC4^TDevice Control 4
001 01010252115ERRNAK^UNegative Acknowledgement
001 01100262216SYNCSYN^VSynchronous Idle
001 01110272317LEMETB^WEnd of Transmission Block
001 10000302418S0CAN^XCancel
001 10010312519S1EM^YEnd of Medium
001 1010032261AS2SSSUB^ZSubstitute
001 1011033271BS3ESC^[\e[9]Escape[10]
001 1100034281CS4FS^\File Separator
001 1101035291DS5GS^]Group Separator
001 1110036301ES6RS^^[11]Record Separator
001 1111037311FS7US^_Unit Separator
111 11111771277FDEL^?Delete[12][6]

Other representations might be used by specialist equipment, for example ISO 2047 graphics or hexadecimal numbers.

Printable characters

Codes 20hex to 7Ehex, known as the printable characters, represent letters, digits, punctuation marks, and a few miscellaneous symbols. There are 95 printable characters in total.[13]

Code 20hex, the "space" character, denotes the space between words, as produced by the space bar of a keyboard. Since the space character is considered an invisible graphic (rather than a control character)[15] [] [55] it is listed in the table below instead of in the previous section.

Code 7Fhex corresponds to the non-printable "delete" (DEL) control character and is therefore omitted from this chart; it is covered in the previous section's chart. Earlier versions of ASCII used the up arrow instead of the caret (5Ehex) and the left arrow instead of the underscore (5Fhex).[18][56]

BinaryOctDecHexGlyph
196319651967
010 00000403220space
010 00010413321!
010 00100423422"
010 00110433523

010 01000443624$
010 01010453725%
010 01100463826&
010 01110473927'
010 10000504028(
010 10010514129)
010 1010052422A
010 1011053432B
010 1100054442C,
010 1101055452D
010 1110056462E.
010 1111057472F/
011 000006048300
011 000106149311
011 001006250322
011 001106351333
011 010006452344
011 010106553355
011 011006654366
011 011106755377
011 100007056388
011 100107157399
011 1010072583A:
011 1011073593B;
011 1100074603C<
011 1101075613D=
011 1110076623E
011 1111077633F?
100 00001006440@`@
100 00011016541A
100 00101026642B
100 00111036743C
100 01001046844D
100 01011056945E
100 01101067046F
100 01111077147G
100 10001107248H
100 10011117349I
100 1010112744AJ
100 1011113754BK
100 1100114764CL
100 1101115774DM
100 1110116784EN
100 1111117794FO
101 00001208050P
101 00011218151Q
101 00101228252R
101 00111238353S
101 01001248454T
101 01011258555U
101 01101268656V
101 01111278757W
101 10001308858X
101 10011318959Y
101 1010132905AZ
101 1011133915B[
101 1100134925C\~\
101 1101135935D]
101 1110136945E^
101 1111137955F_
110 00001409660@`
110 00011419761a
110 00101429862b
110 00111439963c
110 010014410064d
110 010114510165e
110 011014610266f
110 011114710367g
110 100015010468h
110 100115110569i
110 10101521066Aj
110 10111531076Bk
110 11001541086Cl
110 11011551096Dm
110 11101561106En
110 11111571116Fo
111 000016011270p
111 000116111371q
111 001016211472r
111 001116311573s
111 010016411674t
111 010116511775u
111 011016611876v
111 011116711977w
111 100017012078x
111 100117112179y
111 10101721227Az
111 10111731237B{
111 11001741247CACK¬|
111 11011751257D}
111 11101761267EESC|~

Character set

Points which represented a different character in previous versions (the 1963 version and/or the 1965 draft) are shown boxed. Points assigned since the 1963 version but otherwise unchanged are shown lightly shaded relative to their legend colours.

Letter   Number   Punctuation   Symbol   Other   Undefined   Character changed from 1963 version and/or 1965 draft

Use

ASCII was first used commercially during 1963 as a seven-bit teleprinter code for American Telephone & Telegraph's TWX (TeletypeWriter eXchange) network. TWX originally used the earlier five-bit ITA2, which was also used by the competing Telex teleprinter system. Bob Bemer introduced features such as the escape sequence.[17] His British colleague Hugh McGregor Ross helped to popularize this work – according to Bemer, "so much so that the code that was to become ASCII was first called the Bemer–Ross Code in Europe".[57] Because of his extensive work on ASCII, Bemer has been called "the father of ASCII".[58]

On March 11, 1968, U.S. President Lyndon B. Johnson mandated that all computers purchased by the United States Federal Government support ASCII, stating:[59][60][61]

I have also approved recommendations of the Secretary of Commerce [Luther H. Hodges] regarding standards for recording the Standard Code for Information Interchange on magnetic tapes and paper tapes when they are used in computer operations. All computers and related equipment configurations brought into the Federal Government inventory on and after July 1, 1969, must have the capability to use the Standard Code for Information Interchange and the formats prescribed by the magnetic tape and paper tape standards when these media are used.

ASCII was the most common character encoding on the World Wide Web until December 2007, when UTF-8 encoding surpassed it; UTF-8 is backward compatible with ASCII.[62][63][64]

Variants and derivations

As computer technology spread throughout the world, different standards bodies and corporations developed many variations of ASCII to facilitate the expression of non-English languages that used Roman-based alphabets. One could class some of these variations as "ASCII extensions", although some misuse that term to represent all variants, including those that do not preserve ASCII's character-map in the 7-bit range. Furthermore, the ASCII extensions have also been mislabelled as ASCII.

7-bit codes

From early in its development,[65] ASCII was intended to be just one of several national variants of an international character code standard.

Other international standards bodies have ratified character encodings such as ISO 646 (1967) that are identical or nearly identical to ASCII, with extensions for characters outside the English alphabet and symbols used outside the United States, such as the symbol for the United Kingdom's pound sterling (£). Almost every country needed an adapted version of ASCII, since ASCII suited the needs of only the US and a few other countries. For example, Canada had its own version that supported French characters.

Many other countries developed variants of ASCII to include non-English letters (e.g. é, ñ, ß, Ł), currency symbols (e.g. £, ¥), etc. See also YUSCII (Yugoslavia).

It would share most characters in common, but assign other locally useful characters to several code points reserved for "national use". However, the four years that elapsed between the publication of ASCII-1963 and ISO's first acceptance of an international recommendation during 1967[66] caused ASCII's choices for the national use characters to seem to be de facto standards for the world, causing confusion and incompatibility once other countries did begin to make their own assignments to these code points.

ISO/IEC 646, like ASCII, is a 7-bit character set. It does not make any additional codes available, so the same code points encoded different characters in different countries. Escape codes were defined to indicate which national variant applied to a piece of text, but they were rarely used, so it was often impossible to know what variant to work with and, therefore, which character a code represented, and in general, text-processing systems could cope with only one variant anyway.

Because the bracket and brace characters of ASCII were assigned to "national use" code points that were used for accented letters in other national variants of ISO/IEC 646, a German, French, or Swedish, etc. programmer using their national variant of ISO/IEC 646, rather than ASCII, had to write, and thus read, something such as

ä aÄiÜ = 'Ön'; ü

instead of

{ a[i] = '\n'; }

C trigraphs were created to solve this problem for ANSI C, although their late introduction and inconsistent implementation in compilers limited their use. Many programmers kept their computers on US-ASCII, so plain-text in Swedish, German etc. (for example, in e-mail or Usenet) contained "{, }" and similar variants in the middle of words, something those programmers got used to. For example, a Swedish programmer mailing another programmer asking if they should go for lunch, could get "N{ jag har sm|rg}sar" as the answer, which should be "Nä jag har smörgåsar" meaning "No I've got sandwiches".

8-bit codes

Eventually, as 8-, 16- and 32-bit (and later 64-bit) computers began to replace 12-, 18- and 36-bit computers as the norm, it became common to use an 8-bit byte to store each character in memory, providing an opportunity for extended, 8-bit relatives of ASCII. In most cases these developed as true extensions of ASCII, leaving the original character-mapping intact, but adding additional character definitions after the first 128 (i.e., 7-bit) characters.

Encodings include ISCII (India), VISCII (Vietnam). Although these encodings are sometimes referred to as ASCII, true ASCII is defined strictly only by the ANSI standard.

Most early home computer systems developed their own 8-bit character sets containing line-drawing and game glyphs, and often filled in some or all of the control characters from 0 to 31 with more graphics. Kaypro CP/M computers used the "upper" 128 characters for the Greek alphabet.

The PETSCII code Commodore International used for their 8-bit systems is probably unique among post-1970 codes in being based on ASCII-1963, instead of the more common ASCII-1967, such as found on the ZX Spectrum computer. Atari 8-bit computers and Galaksija computers also used ASCII variants.

The IBM PC defined code page 437, which replaced the control characters with graphic symbols such as smiley faces, and mapped additional graphic characters to the upper 128 positions. Operating systems such as DOS supported these code pages, and manufacturers of IBM PCs supported them in hardware. Digital Equipment Corporation developed the Multinational Character Set (DEC-MCS) for use in the popular VT220 terminal as one of the first extensions designed more for international languages than for block graphics. The Macintosh defined Mac OS Roman and Postscript also defined a set, both of these contained both international letters and typographic punctuation marks instead of graphics, more like modern character sets.

The ISO/IEC 8859 standard (derived from the DEC-MCS) finally provided a standard that most systems copied (at least as accurately as they copied ASCII, but with many substitutions). A popular further extension designed by Microsoft, Windows-1252 (often mislabeled as ISO-8859-1), added the typographic punctuation marks needed for traditional text printing. ISO-8859-1, Windows-1252, and the original 7-bit ASCII were the most common character encodings until 2008 when UTF-8 became more common.[63]

ISO/IEC 4873 introduced 32 additional control codes defined in the 80–9F hexadecimal range, as part of extending the 7-bit ASCII encoding to become an 8-bit system.[67]

Unicode

Unicode and the ISO/IEC 10646 Universal Character Set (UCS) have a much wider array of characters and their various encoding forms have begun to supplant ISO/IEC 8859 and ASCII rapidly in many environments. While ASCII is limited to 128 characters, Unicode and the UCS support more characters by separating the concepts of unique identification (using natural numbers called code points) and encoding (to 8-, 16- or 32-bit binary formats, called UTF-8, UTF-16 and UTF-32).

ASCII was incorporated into the Unicode (1991) character set as the first 128 symbols, so the 7-bit ASCII characters have the same numeric codes in both sets. This allows UTF-8 to be backward compatible with 7-bit ASCII, as a UTF-8 file containing only ASCII characters is identical to an ASCII file containing the same sequence of characters. Even more importantly, forward compatibility is ensured as software that recognizes only 7-bit ASCII characters as special and does not alter bytes with the highest bit set (as is often done to support 8-bit ASCII extensions such as ISO-8859-1) will preserve UTF-8 data unchanged.[68]

See also

  • 3568 ASCII, an asteroid named after the character encoding

  • Ascii85

  • ASCII art

  • ASCII Ribbon Campaign

  • Basic Latin (Unicode block) (ASCII as a subset of Unicode)

  • Extended ASCII

  • HTML decimal character rendering

  • List of Unicode characters

  • Jargon File, a glossary of computer programmer slang which includes a list of common slang names for ASCII characters

  • List of computer character sets

  • Alt codes

References

[1]
Citation Linkopenlibrary.orgThe 128 characters of the 7-bit ASCII character set are divided into eight 16-character groups called sticks 0–7, associated with the three most-significant bits. Bemer, Robert William (1980). "Chapter 1: Inside ASCII" (PDF). General Purpose Software. Best of Interface Age. 2. Portland, OR, USA: dilithium Press. pp. 1–50. ISBN 978-0-918398-37-6. LCCN 79-67462. Archived from the original on August 27, 2016. Retrieved August 27, 2016, from: Bemer, Robert William (May 1978). "Inside ASCII – Part I". Interface Age. 3 (5): 96–102. Bemer, Robert William (June 1978). "Inside ASCII – Part II". Interface Age. 3 (6): 64–74. Bemer, Robert William (July 1978). "Inside ASCII – Part III". Interface Age. 3 (7): 80–87. Depending on the horizontal or vertical representation of the character map, sticks correspond with either table rows or columns.
Sep 23, 2019, 5:53 AM
[2]
Citation Linkopenlibrary.orgThe Unicode characters from the area U+2400 to U+2421 reserved for representing control characters when it is necessary to print or display them rather than have them perform their intended function. Some browsers may not display these properly.
Sep 23, 2019, 5:53 AM
[3]
Citation Linkopenlibrary.orgCaret notation is often used to represent control characters on a terminal. On most text terminals, holding down the Ctrl key while typing the second character will type the control character. Sometimes the shift key is not needed, for instance ^@ may be typable with just Ctrl and 2.
Sep 23, 2019, 5:53 AM
[4]
Citation Linkopenlibrary.orgCharacter escape sequences in C programming language and many other languages influenced by it, such as Java and Perl (though not all implementations necessarily support all escape sequences).
Sep 23, 2019, 5:53 AM
[5]
Citation Linkopenlibrary.orgThe Backspace character can also be entered by pressing the ← Backspace key on some systems.
Sep 23, 2019, 5:53 AM
[6]
Citation Linkopenlibrary.orgThe ambiguity of Backspace is due to early terminals designed assuming the main use of the keyboard would be to manually punch paper tape while not connected to a computer. To delete the previous character, one had to back up the paper tape punch, which for mechanical and simplicity reasons was a button on the punch itself and not the keyboard, then type the rubout character. They therefore placed a key producing rubout at the location used on typewriters for backspace. When systems used these terminals and provided command-line editing, they had to use the "rubout" code to perform a backspace, and often did not interpret the backspace character (they might echo "^H" for backspace). Other terminals not designed for paper tape made the key at this location produce Backspace, and systems designed for these used that character to back up. Since the delete code often produced a backspace effect, this also forced terminal manufacturers to make any Delete key produce something other than the Delete character.
Sep 23, 2019, 5:53 AM
[7]
Citation Linkopenlibrary.orgThe Tab character can also be entered by pressing the Tab ↹ key on most systems.
Sep 23, 2019, 5:53 AM
[8]
Citation Linkopenlibrary.orgThe Carriage Return character can also be entered by pressing the ↵ Enter or Return key on most systems.
Sep 23, 2019, 5:53 AM
[9]
Citation Linkopenlibrary.orgThe \e escape sequence is not part of ISO C and many other language specifications. However, it is understood by several compilers, including GCC.
Sep 23, 2019, 5:53 AM
[10]
Citation Linkopenlibrary.orgThe Escape character can also be entered by pressing the Esc key on some systems.
Sep 23, 2019, 5:53 AM
[11]
Citation Linkopenlibrary.org^^ means Ctrl+^ (pressing the "Ctrl" and caret keys).
Sep 23, 2019, 5:53 AM
[12]
Citation Linkopenlibrary.orgThe Delete character can sometimes be entered by pressing the ← Backspace key on some systems.
Sep 23, 2019, 5:53 AM
[13]
Citation Linkopenlibrary.orgPrinted out, the characters are: !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~
Sep 23, 2019, 5:53 AM
[14]
Citation Linkwww.itscj.ipsj.or.jpANSI (December 1, 1975). ISO-IR-006: ASCII Graphic character set (PDF). ITSCJ/IPSJ.
Sep 23, 2019, 5:53 AM
[15]
Citation Linkweb.archive.orgMackenzie, Charles E. (1980). Coded Character Sets, History and Development (PDF). The Systems Programming Series (1 ed.). Addison-Wesley Publishing Company, Inc. pp. 6, 66, 211, 215, 217, 220, 223, 228, 236–238, 243–245, 247–253, 423, 425–428, 435–439. ISBN 978-0-201-14460-4. LCCN 77-90165. Archived (PDF) from the original on May 26, 2016. Retrieved August 25, 2019.
Sep 23, 2019, 5:53 AM
[16]
Citation Linkwww.iana.org"Character Sets". Internet Assigned Numbers Authority (IANA). May 14, 2007. Retrieved August 25, 2019.
Sep 23, 2019, 5:53 AM
[17]
Citation Linkweb.archive.orgBrandel, Mary (July 6, 1999). "1963: The Debut of ASCII". CNN. Archived from the original on June 17, 2013. Retrieved April 14, 2008.
Sep 23, 2019, 5:53 AM
[18]
Citation Linkweb.archive.org"American Standard Code for Information Interchange, ASA X3.4-1963". American Standards Association (ASA). June 17, 1963. Archived from the original on September 28, 2018. Retrieved September 28, 2018.
Sep 23, 2019, 5:53 AM
[19]
Citation Linkopenlibrary.org"USA Standard Code for Information Interchange, USAS X3.4-1967". United States of America Standards Institute (USASI). July 7, 1967. Cite journal requires |journal= (help)
Sep 23, 2019, 5:53 AM
[20]
Citation Linkweb.archive.orgJennings, Thomas Daniel (April 20, 2016) [1999]. "An annotated history of some character codes or ASCII: American Standard Code for Information Infiltration". World Power Systems (WPS). Archived from the original on September 28, 2018. Retrieved September 28, 2018.
Sep 23, 2019, 5:53 AM